Film repair for PVC windows and doors
Is the foil on your PVC windows peeling, discoloured or blistering? Noevo assesses the profile covering and repairs affected areas where possible. This concerns coloured or woodgrain foil on the profile. Solar-control or privacy film on the glass requires a different approach.
Send overview photos and details of the peeling foil, your region, profile type and desired finish. Noevo can then assess more quickly whether foil repair fits.
In brief
Film repair for PVC windows and doors in brief
Film repair restores PVC windows and doors where the foil is peeling, discoloured or damaged. Noevo treats only the affected zones, applies matching Renolit or Hornschuch film and avoids demolition or full replacement while preserving the original look.
Foil peeling? Repair your PVC windows without replacing them
Noevo starts with the visible damage: peeling foil, blisters, UV discolouration or local foil damage. We first check whether the profile is still suitable for new foil.
- Repair peeling foil, blisters and open edges
- Apply new foil to PVC windows and doors
- Match colour and texture to the existing foil finish
- Repair as an alternative to immediately replacing windows
Before & after film repair
From damaged to new – professional film repair makes the difference
Which assessment fits your situation?
| Situation | What to assess | What to send |
|---|---|---|
| Peeling edge or local damage | Assess whether a defined repair area and suitable finish are possible. | Close-up of the edge and an overview of the whole profile. |
| Blisters or widespread discolouration | Extent, adhesion and substrate determine the repair approach. | All affected areas and any differences between building elevations. |
| Film on the glass | This is a different application from the profile covering discussed here. | Show clearly where the film is located. |
Clarify the warranty before agreeing
Noevo’s general terms state a 10-year warranty on work carried out under normal conditions of use. Before agreeing, discuss which warranty conditions apply to your repair.
Read the general termsBenefits, approach and applications
Why film repair?
Foil on PVC windows or doors can peel, bubble or discolour due to UV exposure, age or installation. Noevo first checks whether the profile remains suitable for local repair.
Our solution
Noevo repairs damaged areas locally when the profile remains usable. We remove the affected foil, prepare the substrate and apply a finish in a suitable colour and texture.
Repairing PVC windows
Repair starts by identifying where the damage lies. If the profile is sound but the foil peels, discolours, blisters or has local damage, the affected areas can be treated.
Foil repair for PVC windows
Noevo removes the damaged or loose foil area, prepares the substrate and applies a suitable foil finish. This suits open edges, blisters, scratches and local discolouration.
Restoring the colour of PVC windows
Diagnosis distinguishes surface dirt, local foil damage and a broader colour change. Cleaning, foil repair and refinishing each suit a different situation.
Clean, repair the foil, refinish or replace?
Cleaning may be enough for dull PVC. Peeling foil or blisters usually call for foil repair. A full colour change may suit refinishing, while replacement mainly applies to structural problems.
See when refinishing PVC is more suitableWhat will the repair look like?
The existing colour, texture, ageing and damage determine which finish is suitable. A local repair may remain visibly different from surrounding areas. Discuss the repair area and expected colour and texture beforehand. Our references show actual before-and-after photos.
- Targeted repair of affected foil areas
- Targeted repair of damaged areas where the surrounding finish can be retained.
- An alternative to replacement when the profile remains usable
- Colour and texture matched to the existing finish
- An approach based on the damage pattern and photos
- Active throughout West and East Flanders
- 01
Remove damaged film
Noevo removes loose or damaged foil from the affected area.
- 02
Prepare substrate
The surface is cleaned and matted to prepare it for the new foil.
- 03
Apply new film
We apply suitable foil matched to the colour and texture of the existing finish.
- 04
Delivery & inspection
Noevo checks the transition, adhesion and connection with the existing finish.
- PVC windows
- Fixed, tilt-and-turn and sliding windows, depending on the profile and damage
- PVC doors
- Front and back doors, sliding doors
- Conservatory profiles
- Roof profiles, gutter cladding, finishing strips
- Plastic facade cladding
- Fascia boards, barge boards, panels
- Peeling film or bubbles due to poor adhesion
- UV discoloration, especially on south-facing facades
- Installation or mounting damage by installer
- Temperature damage from extreme cold or heat
- Scratches, dents or storm damage
- Desired color change to different woodgrain finish
What determines the foil repair quote?
The price mainly depends on the size of the damaged areas and the foil finish. Clear photos support targeted advice.
- Number of windows, doors or profile areas
- Foil type: colour, woodgrain or textured finish
- Damage: peeling foil, blisters, discolouration or scratches
- Accessibility of affected areas
- Need to colour-match existing foil
- Overview photos and details of peeling foil
Carried out locally by Noevo BV
- Family business based in Izegem
- Active in West and East Flanders
- Available by phone on +32 51 79 55 99
- Advice based on clear photos of the foil damage
Frequently asked questions about film repair
Interested in film repair for pvc windows and doors?
Request a no-obligation quote based on the material, damage and site access
Related services
Discover related Noevo specialties